PI ducting

Approx. Rs 115 / sqftGet Latest Price

Light Weight for Efficient Installation

- Fabricated from sandwich panels of polyisocyanate foam board, faced on both sides with aluminium foil lacquered with an epoxy resin, and using lightweight but robust aluminium jointing and plastic foam gaskets.

Additional Information:

Approx. Rs 100 / PieceGet Latest Price

ETD had a complete range of Pre-Insulated duct accessories with high quality :

·         Invisible Flange  :

PVC/ALUMINUM flange joint is used for the fabrication of pre-insulated air duct panels. the standard length of the flange is 4m/piece, and any other shorter length can be custom-made. the width we can supply is 20 / 30 mm,Packing: 80 m / Bundle – 4m / Pcs

·         PVC Angle-Corner :

Gray polymer covering angle to reinforce the duct corners externally and improve appearance . Size 20/30mm .

Available in 1 way shape ,2 ways shape .

·         Aluminum F Flange : 

Permits all accessories with fastening frames higher than 20 mm to be fastened to the ducts  ,Size: 20 mm/30 mm, Packing: 80 m /Bundle – 4m / Pcs .

·         Aluminum U Flange : 

Extremely versatile aluminium section for fastening of anti-vibration joints, volume dampers, and connection to sheet
metal ducts, Size: 20 mm/30 mm, Packing: 80 m/Bundle – 4m / Pcs .

·         Aluminum Chair Flange : 

Used to fasten ducts to air handling units and in the assembly of linear diffusers and damper. Size: 20 mm/30 mm, Packing: 80 m / Bundle – 4m / Pcs .

·         PVC H Slide Joint :

Built in shock-resistant polymer, this piece permits “invisible flanges” to be connected. Size: 20 mm, Packing: 200 m / Bundle – 4m / Pcs .

·         GI Corner :

GI Corner 1.5 thick zinc-coated steal  ,angle bracket 1000pcs/ctn .

·         Aluminum Reinforcement Bar : 

Special high stiffness aluminium alloy reinforcement section bar.

·         Aluminum Disk : 

Aluminium Disk to distribute the pressure created at the centre over a wider surface to prevent damage to the panel.

Additional Information:

Approx. Rs 50 / PieceGet Latest Price

GI Corner is used for the fabrication of pre-insulated air duct panels.

We provide 1.5 thick zinc-coated steal angle bracket 1000pcs/ctn.

GI Coner for PIC Duct also offers excellent quality.

Additional Information:

Approx. Rs 65 / PER 10 PIECEGet Latest Price

• Size :  21mm
• Be used IN PRE INSULATED DUCT, uses in market,hospital,supermarket, stadium, hotel, workshop, guesthouse, airport, pure project food store, and so on
• Considerable saving in cost.
• Light, safe, decrease the load of the DUCTING.
• Easy to install, shorten the construction period

Additional Information: